Material Introduction

• What Are the Factors of Plastic Degradation

  Plastic degradation refers to decomposition. In polymer chemistry, it usually refers to the process of decreasing polymerization degree of polymer molecules under chemical or physical action.

  Material Introduction April 27, 2019
• Introduction of the Characteristics of Plastic-wood Composite

  Plastic wood composite material is a new type of environmental protection and energy saving material, which is produced by plastic wood extruder.

  Material Introduction April 23, 2019
• Modification and Application of TPU as Toughening Agent

  In order to reduce the cost of products and obtain additional properties, polyurethane thermoplastic elastomer can be used as a common toughening agent to toughen many kinds of thermoplastic plastics and modified rubber materials.

  Material Introduction April 01, 2019
• What Are the Applications of TPU?

  As an excellent elastomer, the downstream product of TPU is very broad, and it is widely used in the fields of daily necessities, sporting goods, toys, decorative materials, and so on.

  Material Introduction March 27, 2019
• Preparation and Properties of Anti-aging Transparent Polypropylene

  Polypropylene (PP) is a kind of semi-crystalline polymer, which has excellent mechanical properties and has been widely used.

  Material Introduction March 11, 2019
• Long Glass Fiber Reinforced PP

  The long fiber has large retention length, which makes PP have better rigidity and creep resistance, higher compressive strength, higher flexural strength, better impact property and higher service temperature.

  Material Introduction March 06, 2019
• Composite Strengthening of PP with Crystal Whisker and Talc Powder

  When the whisker is mixed with PP, it can change the crystallization behavior of PP, and has obvious strengthening effect.

  Material Introduction March 04, 2019
• Problems and Solutions of Injection Molding PC/ABS Products

  Problems and Solutions of Injection Molding PC/ABS products

  Material Introduction March 01, 2019
• Polycarbonate (PC)/ ABS alloy

  PC/ABS has a combination characters of PC and ABS.

  Material Introduction February 27, 2019
• Acrylonitrile-butadiene-styrene Plastics (ABS)

  ABS is a kind of general type of thermoplastic engineering plastics

  Material Introduction February 25, 2019