Material Introduction

• Properties of Glass Fiber Reinforced Flame Retardant PBT

  Adding PE resin in the process of preparing PBT, calcium stearate can improve the processing fluidity of PBT, with the addition of anti-drip agent, a 30% GF reinforced PBT flame retardant material with excellent comprehensive properties such as flame retardant and mechanical properties can be obtained with a small amount of flame retardant added.

  Material Introduction April 25, 2022
• Plasticization and Toughening Modification of PLA

  PLA has excellent properties such as high mechanical strength, ductility and good biocompatibility, and is easy to process. Among them, blow molding and thermoplastic are the most commonly used, with a wide range of applications and promising prospects.

  Material Introduction April 06, 2022
• Plasticization Modification of PBAT/Starch Films

  Using corn starch and PBAT as the main raw materials, and glycerol as the main plasticizer, starch-filled PBAT film was made by extruder granulation and then blow molding. The plasticizing effects of different plasticizers in starch-filled PBAT materials were studied and compared.

  Material Introduction March 07, 2022
• Filling modification and blending modification of nylon

  The reactivity of PA makes it easy to modify, and the composite materials or alloys can be prepared by the method of fiber reinforcement, inorganic filling and blending with other polymers or polyamides of different varieties.

  Material Introduction February 21, 2022
• Application of viscosity-increasing masterbatch in stretch film

  Nanjing Haisi Extrusion Equipment Co., Ltd. provides viscosity-increasing masterbatch granulator.

  Material Introduction January 17, 2022
• Application and development trend of modified nylon

  Application and development trend of modified nylon

  Material Introduction January 10, 2022
• PVC Wire Cable Covering Granules

  Plastic granuels extruder for PVC wire cable cover material.

  Material Introduction June 21, 2019
• What Are the Factors of Plastic Degradation

  Plastic degradation refers to decomposition. In polymer chemistry, it usually refers to the process of decreasing polymerization degree of polymer molecules under chemical or physical action.

  Material Introduction April 27, 2019
• Introduction of the Characteristics of Plastic-wood Composite

  Plastic wood composite material is a new type of environmental protection and energy saving material, which is produced by plastic wood extruder.

  Material Introduction April 23, 2019
• Modification and Application of TPU as Toughening Agent

  In order to reduce the cost of products and obtain additional properties, polyurethane thermoplastic elastomer can be used as a common toughening agent to toughen many kinds of thermoplastic plastics and modified rubber materials.

  Material Introduction April 01, 2019