Material Introduction

• Importance of Material Selection And Manufacturing Process for Screws And Barrels

  The screw and barrel are key components of plastic extruders and have an important impact on the performance and production efficiency of the extruder. Therefore, the selection of appropriate materials and manufacturing processes is critical to the performance of screws and barrels.

  Material Introduction December 25, 2023
• EVA Hot Melt Adhesive Tips Fully Revealed!

  Hot melt adhesive is a solid adhesive that uses thermoplastic resin as the base material, adds various tackifiers, antioxidants, and other auxiliary materials, and is melted and mixed. It has the advantages of solvent free, convenient synthesis, short curing time, wide bonding range, convenient storage and transportation, and green environmental protection, thus achieving rapid development.

  Material Introduction December 14, 2023
• What Is The Difference between "Pre Mixing" And "Mixing" in Plastic Modification?

  ▪ Pre mixing - refers to the mixing of modified materials (base materials, auxiliary materials, additives) in the pre mixing machine before the polymer mixing host (such as twin screw, continuous mixer, Booth kneading machine, three screw, etc.), and basically operating below the melting point of the base resin; ▪ Mixing - refers to the use of measuring scales (including weight loss scales, weight gain scales, solid volume pumps, etc.) above the main material inlet of the mixing host to achieve "mixing" of multi flavored materials in a small discharge well (or hopper), and to achieve "mixing" in the host; The latter obviously completes wetting, dispersion, extrusion, and granulation above the melting point of the base material.

  Material Introduction December 07, 2023
• 10 Precautions And Four Example Analysis for Modified Nylon

  The special properties of nylon make it widely used in automobiles, electronic and electrical equipment, mechanical structures, sports equipment, textiles, and other fields. But with the miniaturization of automobiles, the high-performance of electronic and electrical equipment, and the acceleration of lightweight mechanical equipment, the demand and performance requirements for nylon are gradually increasing. Therefore, the modification of nylon is particularly important.

  Material Introduction December 05, 2023
• Performance and Application of Biodegradable Plastic PLA and PBS

  Any interest in biodegradable plastic granule compounding extruder, please feel free to contact Nanjing Haisi Extrusion.

  Material Introduction January 04, 2022
• TPE Material Decoding: Revealing The Four Commonly Used Thermoplastic Elastomer Materials

  Thermoplastic elastomers are an important component of elastomers. Common types of thermoplastic elastomers include styrene based thermoplastic elastomers, polyurethane based thermoplastic elastomers, polyolefin based thermoplastic elastomers, and polyamide based thermoplastic elastomers.

  Material Introduction November 30, 2023
• Share Several Commonly Used Plastic Modification Formulas

  Share several commonly used plastic modification formulas 01 Universal Thermoplastic Reinforcement Formula 02 Engineering plastic reinforcement formula 03 Thermosetting plastic reinforcement formula 04 Other plastic reinforcement formulas

  Material Introduction November 27, 2023
• Not Familiar with Plastic Modification? It Is Enough To Read This Article.

  Plastic modification refers to the process of improving or improving the original properties of resins through physical, chemical, mechanical, and other means. Modified plastics are collectively referred to as "modified plastics".

  Material Introduction November 23, 2023
• What Are The Advantages of Using TPE/TPR As Toy Material?

  TPE/TPR materials have recyclable properties, do not contain any potential toxic ingredients, have adjustable hardness, and support oil spraying, screen printing, and printing processing, making them a good choice to replace PVC materials!

  Material Introduction November 20, 2023
• Basic Introduction To Transparent Nylon: Modification Preparation, Processing Injection Molding, And Application

  Transparent nylon is a polymer material with excellent comprehensive properties. It not only has advantages such as high mechanical strength, good thermal stability, and excellent corrosion resistance, but also has advantages such as easy forming and processing, good dimensional stability, low linear expansion coefficient, high cost-effectiveness, excellent electrical insulation and aging resistance, non-toxic, odorless, and easy to form alloys with other amorphous or semi crystalline polyimide.

  Material Introduction November 16, 2023