Product News
- The difference between screw vacuum pump and roots vacuum pumpThe difference between screw vacuum pump and roots vacuum pump.Products Release May 22, 2023
- Hydraulic Automatic Meshless DieheadHydraulic automatic slag discharge meshless die has the characteristics of automatic impurity discharge, no strainer, environmental protection and power saving, strengthened plasticization, no loss, and simple control.Products Release May 15, 2023
- Advantages of three-screw extruderThree-screw extruder has been well applied in the preparation of functional plastics, the preparation of high-brightness coatings and convenient food processing, and has begun to attract attention with its excellent mixing characteristics, better capacity ratio, and smaller length-diameter ratio.Products Release April 10, 2023
- Screen Changer - Continuous Polymer FiltrationMain features: The screen changer device is in the middle of the screw and before the exhaust, no matter when changing the screen at a fast or slow speed, the discharge of the machine head will normally cut off the sliver.Products Release April 03, 2023
- PA66 applications with different fiber ratiosApplication of Nylon with Different Fiber RatioMaterial Introduction March 27, 2023
- What are the difficulties faced in the manufacture of glass fiber reinforced nylon?The rigidity and hardness of the material can be significantly improved by glass fiber reinforcement, and the dimensional stability and heat resistance of the material can be significantly improved.Material Introduction March 20, 2023
- A Tough engineering plastic that combines rigidity and toughnessIs there a strong engineering plastic with good toughness, rigidity and strength?Material Introduction March 15, 2023
- How to improve the performance of LDPE blown film?Increase intensity Improves slippage Improved heat sealing performance: inclusion Improved low temperature heat sealabilityMaterial Introduction March 02, 2023
- Color powder, color masterbatch, color paste, color oil - the advantages and disadvantages of different coloring methods of plasticsIn the coloring of the plastic industry, pigments and masterbatches are used relatively extensively.Material Introduction February 27, 2023
- Modified nylon PA6 plus 30% glass fiber reinforced parts processing and molding 10 pointsNanjing Haisi Extrusion supply twin screw extruder for 30% glass fiber reinforced PA6 modification.Material Introduction February 27, 2023