Products Release

• Maintenance And Repair of Extruder Screws And Barrels

  Since its introduction, twin-screw extruders have been widely used in the field of plastic modification and are the core equipment in the field of modification. Every modification factory takes good care of the twin-screw extruder, but in daily work, it is inevitable to encounter equipment loss and repair. So in order to avoid or reduce loss, how to repair it after a failure, the editor will introduce to you some tips on extruder maintenance and repair.

  Products Release August 15, 2024
• Six Kinds of Recycled Plastic Process

  Six kinds of recycled plastic process 1.Process flow of recycled low-density polyethylene (LDPE) 2.Recycled Polypropylene (PP) Process 3.Recycled polyethylene terephthalate (PET) process flow 4.ABS plastic process flow 5.Recycled Polycarbonate (PC) Process 6.Recycled polyvinyl chloride (PVC) hard material process flow

  Products Release August 12, 2024
• How To Choose Among 7 Pelletizing Methods?

  How to choose among 7 pelletizing methods? 01.Process performance of pelletizing device 02.When ordering, is it better to choose cold cuts or hot cuts? 03.There are seven types of pelletizing lines commonly seen on the market:

  Products Release August 08, 2024
• 14 Common Senses To Pay Attention To in Extruder Operation And Debugging

  As the main equipment for compounding production, the extruder is the most difficult and dangerous to operate. Today, we have sorted out some tips for you to keep in mind during the operation and debugging of the extruder, so as to protect safe and efficient production.

  Products Release August 01, 2024
• Learn More about The Innovative Technology of Twin Screw Extruders

  In the ever-evolving plastics industry, the technological innovation of twin-screw extruders has always led the industry's progress. Today, let us explore the latest innovations of twin-screw extruders.

  Products Release July 29, 2024
• How To Choose The Appropriate Pelletizing Method for Modified Granulation of Different Materials

  When pure resin is "modified", the more suitable pelletizing method often changes; Examples of pelletizing selection for common modified special materials or masterbatches; Examples of pelletizing selection for the following polymers or modified materials.

  Products Release July 25, 2024
• Structural Features of Co-rotating Twin-screw Extruder

  The most notable feature of the co-rotating twin-screw extruder is that both the screw and barrel adopt a "building block" design. By combining various threaded elements, the co-rotating twin-screw extruder has the functions of feeding, melting, mixing, exhausting, pressure holding and conveying, realizing various process such as material conveying, plasticizing, shearing, exhausting, pressure holding and extrusion.

  Products Release July 15, 2024
• How To Prolong The Service Life of Twin Screw Granulator

  Prolonging the service life of the twin screw granulator requires attention to some key aspects, including correct operation, regular maintenance and proper care. Here are some suggestions:1. Correct operation 2. Regular maintenance 3. Cleaning and lubrication 4. Temperature control 5. Avoid no-load operation 6. Repair faults promptly 7. Regularly check the electrical system 8. Staff training 9. Check the cooling system regularly 10. Purchase high-quality raw materials

  Products Release July 11, 2024
• Classification of Recycled PE And Its Diversified Uses After Modification

  Classification of recycled PE and its diversified uses after modification Main classification of recycled PE Modified types of recycled PE Uses of recycled modified PE

  Products Release July 04, 2024
• Four Ways To Clean Twin Screw Extruder Screws

  As the workhorse in the field of compounding, the twin-screw extruder's superior performance and customizability are its advantageous features in this position. It can combine different additives and fillers to achieve different particle shapes and properties with different properties. While a variety of additives and fillers can be processed for extrusion, some methods of obtaining these products can also lead to contamination problems and low flow or low pressure in many areas throughout the barrel.

  Products Release July 01, 2024