Article List
- There Is Always Something You Don’t Know about The Mechanism of Elastomer Toughening Polymers01 Types of Elastomers 02 Mechanism of elastomer-enhanced toughened polymersMaterial Introduction November 28, 2024
- Basic Properties And Applications of PC/ABS AlloyThe future development trend of PC/ABS alloy will focus on technological innovation, market demand growth, expansion of application areas and performance improvement, and the prospects are broad.Material Introduction November 25, 2024
- Detailed Explanation of Common Problems with Hot Melt Adhesive!Hot melt adhesive is a plastic adhesive. Its physical state will change with the change of temperature within a certain temperature range. Its chemical properties are non-toxic and odorless, and it is an environmentally friendly chemical.Material Introduction November 21, 2024
- Do You Know The 11 Important Principles of Plastic Extrusion?11 important principles of plastic extrusion 01Mechanical Principle 02Heat principle 03Deceleration principle 04Feed acts as coolant 05In the feeding area, it sticks to the barrel and slides onto the screw 06Materials cost the most 07Energy costs are relatively unimportant 08The pressure at the end of the screw is important 09Output = displacement of the last thread +/- pressure flow and leakage 10 Shear rate plays a major role in viscosity 11The motor and the cylinder are opposite to each otherProducts Release November 18, 2024
- Main Application Areas of PBAT PlasticPBAT (polybutylene adipate/terephthalate) is a biodegradable plastic that is widely used in many fields due to its good biodegradability and physical properties.Material Introduction November 11, 2024
- What Types of Plastics Are There?The basic concept of plastics and the performance characteristics of commonly used engineering plastics.Material Introduction November 07, 2024
- The Main Causes And Countermeasures of Gear Transmission NoiseTraditionally, the two main factors for measuring gear transmission performance are load capacity and fatigue life, and transmission noise and transmission accuracy are often ignored. With the promulgation of ISO14000 and ISO18000, the importance of controlling gear transmission noise has become increasingly apparent, and industrial development and demand have increasingly stringent requirements for transmission errors of high-precision equipment (gear transmission backlash). The currently known factors that cause gear noise can be roughly analyzed from several aspects, including design, manufacturing, installation, use and maintenance.Products Release November 04, 2024
- A Brief Introduction To The Production Process of Modified PlasticsThe so-called "plastic modification" refers to a method of adding one or more other substances to the plastic resin to change its original properties, improve one or more aspects of its properties, and thus expand its scope of application.Material Introduction October 31, 2024
- There Are Higher Requirements for The Production Efficiency And Product Quality of Twin-screw Extruders. Where Can We Start To Optimize Them?As the manufacturing and processing technology of twin-screw extruders becomes better and better, it not only has to perform tasks such as feeding and plasticizing, but also has some requirements such as dehydration and drying. In order to better meet the different needs of users, the twin-screw extruder must continuously improve its working efficiency, and also find ways to improve the quality of the products produced.Products Release October 28, 2024
- What Is The Difference between PET And PE?Polyethylene terephthalate is a colorless, transparent substance with a certain gloss (amorphous), or an opaque milky white substance (crystalline). Physical properties: Polyethylene is non-toxic, odorless, and milky white. It has a density of 0.91-0.96g/cm3 and is a crystalline plastic. Polyethylene has a certain mechanical strength, but its mechanical strength is lower than that of other plastics and its surface hardness is poor.Material Introduction October 24, 2024