Article List

• Conical Twin Screw Forced Feeder

  The conical twin-screw feeder solves the complicated feeding procedure in the prior art plastic granulation process, and realizes the conical twin-screw feeding integrated unit for stable and continuous feeding to the extruder.

  Products Release September 12, 2023
• Basic principles of twin-screw extrusion of plastics

  This article introduces the basic principles of twin screw extrusion of plastics, including Mechanical principles，Thermal principle，Deceleration principle，The feed acts as a coolant，In the feed zone, sticks to the barrel & slides onto the screw，Materials cost the most，Energy costs are relatively unimportant，The pressure at the end of the screw is very important，Output = displacement of last thread +/- pressure flow and leakage，Shear rate plays a major role in viscosity， and The motor is opposed to the barrel these aspects.

  Products Release September 06, 2023
• With these auxiliary machines, the twin screw extruder is perfect

  The twin screw extruder has a wide range of applications, and can process and produce a variety of products. We need to choose different auxiliary machines to adapt or improve the material characteristics, and make products perfect.

  Products Release August 28, 2023
• Maintenance Tips for the Gearbox of Twin Screw Extruder

  In the daily production of twin screw extruders, necessary maintenance work needs to be carried out on the gearbox

  Products Release August 21, 2023
• Plastic modification methods of polymer materials

  in order to meet the needs of different uses, chemical or physical methods are used to change some properties of plastic products to achieve the intended purpose, which is plastic modification.

  Material Introduction August 14, 2023
• Common problems and solutions for TPE extrusion granulation

  Q1.The length is larger than the normal pelletA: Cause of occurrence:The main reasons are: starting the machine, pulling or breaking the strip, the direction of the strip is not straight, the strip is not properly soaked in water, and the cutting tool of the granulator is worn or has gaps.Main solut

  Products Release August 07, 2023
• TPE Granulation Process

  We are familiar with TPE materials as formula materials, which are composed of SEBS, plastics, filling oil, fillers, and other additives. Based on SEBS and other related materials, they all have good processing performance and an important processing process called "granulation". The granulation pro

  Products Release July 31, 2023
• Twin Screw Extruder Powder Coating Processing Applications

  The meshing type co-rotating parallel twin screw extruder has the advantages of high conveying efficiency, strong dispersion and mixing ability, good self-cleaning performance, uniform distribution of material residence time in the machine and good adaptability, and is widely used in blending modification between different plastics and between plastics and rubber.

  Material Introduction July 24, 2023
• The Difference Between PVC and TPE Mats

  With the progress of society, the car floor mat industry has become increasingly mature, and the raw materials used have also been concentrated from the original XPE, EVA and other materials to PVC, and TPE materials that have sprung up in recent years.TPV and TPE are the current mainstream material

  Material Introduction July 18, 2023
• Summary of Plastic Reinforced Modification Formulations

  There are many common plastic modification technologies, mainly reinforcement technologies, including fiber reinforcement, self-reinforcement, molecular reinforcement; toughening technology; filling modification; blending and plastic alloy technology; flame retardant technology; nanocomposite technology; reaction graft modification; aging resistance; functional modification, including electrical conductivity, antistatic, thermal conductivity and luminescence, etc.; thermoplastic elastomer technology.

  Material Introduction July 14, 2023