Article List
- How to adapt the process to the extruder equipment?1. Different product requirements, different screw combinations 2. How to increase production capacity 3. Product shrinkage hole problem 4. Screw cooling
- The purpose of plastic blending modification1. Improve some physical and mechanical properties of plastics and expand the scope of application 2. Improve melt fluidity and improve molding performance 3. Endow plastic with some special properties to prepare new plastic alloy materials 4. Reduce the cost of materials and improve economic benefits 5. Recycling waste polymer materials to reduce environmental pollutionMaterial Introduction August 08, 2022
- The Effect of Side Feeder on the Improvement of Twin Screw Extruder EfficiencySide feeder has a great effect on the improvement of twin screw extruder efficiency
- What are the components of the underwater pelletizing unit and its advantages?What are the components of the underwater pelletizing unit and its advantages?
- Five factors affecting the replacement frequency of screw elements and barrelFive factors affecting the service life of the barrel and screw elements
- Types and application fields of thermoplastic elastomersElastomers can be divided into thermosetting elastomers and thermoplastic elastomers according to whether they can be plasticized.
- Introduction to Hot Melt AdhesiveAs a new type of carton and carton packaging and sealing, hot melt adhesive sealing has partially replaced the traditional bundled packaging and tape packaging, and is used in the carton outer packaging of various foods and the carton outer packaging of wine, dairy and other products.Material Introduction June 20, 2022
- Five issues to be aware of during the production of calcium carbonate filler masterbatch:Five issues to be aware of during the production of calcium carbonate filled masterbatch:1. Surface modification treatment of calcium carbonateIn order to uniformly disperse the calcium carbonate particles in the filler masterbatch into the base plastic, the calcium carbonate particles must be compl
- What are the advantages of twin-screw extruders?The twin-screw extruder is developed on the basis of the single-screw extruder. The difference between the twin-screw extruder and the single-screw extruder is mainly reflected in two aspects: the material transfer method and the material flow velocity field. Compared with the single screw extruder, the complex flow spectrum of the material in the twin screw extruder shows macroscopic advantages that the single screw extruder cannot match, such as adequate mixing, good heat transfer, high melting capacity, good exhaust capacity, and good control of the material temperature. This article will briefly describe the advantages of twin-screw extruders.
- Why use engineer plastic extruders for recycling?In recent years, engineering plastics extruders have become more and more widely used and have a very important role to play in plastic recycling. We all know that plastics can be quite harmful to the environment, but we really can't say exactly what the hazards are, and they are precisely the reasons why engineer plastic extruders are used to recycle plastics.