Article List
- pc abs pelletizingPC must be pre-dried before molding, the moisture content should be less than 0.02%, the processing of trace moisture at high temperature will produce white turbid color, silver wire and air bubbles, PC has considerable forced high elastic deformation ability at room temperature. The impact toughnes
- formula for cleaning the pvc material in twin screw extruderformula for cleaning the Generally, it is a multi-additive stabilizer, stearic acid and paraffin. It is added in 1 time according to the normal production of small materials. 100kg PVC, stearic acid 1.5kg, paraffin wax 1.8kg, stabilizer 2KG
-
- conical twin screw extruder for pvc compoundsConical twin screw extruder for pvc compound
- screw and barrel for plastic extruderThe screw elements and kneading blocks are designed ,
-
- sp 75-180 two stage extrudersp 75-180 two stage extruderTypical works :Kneader , also call banbury mixer , usually is used with bucket conveyor , conical twin screw force feeder and twin screw extruder pelletizing line for masterbatch and compounds. it has been widely used for high filler masterbatch , carbon black masterbatch
- counter rotating twin screw extruder for pvc pelletizingcounter-rotating twin-screw extruders are widely used in extrusion molding and batch granulation.Tightly meshing counter-rotating twin-screw extruder for PVC profile extrusionThe shear rate is limited to [γ] = 6 to 8S-1. The maximum linear speed of the screwV=7～8m/min for the maximum linear speed of
-
- conical twin screw extruder for pvc compoundconical twin screw extruder for pvc compound and pelletizing