Product News

• Understand The Difference between Single Screw Extruder And Twin Screw Extruder in One Article

  Twin screw extruders are developed on the basis of single screw extruders. Due to their excellent feeding performance, mixing and plasticizing performance, exhaust performance, and extrusion stability, they have been widely used in the molding and processing of extruded products.

  Products Release December 21, 2023
• What Should Be Paid Attention To in The Daily Work of Twin-screw Extruder?

  In the daily operation of a twin-screw extruder, there are several key considerations to keep in mind to ensure smooth and efficient processing.

  Products Release December 18, 2023
• SHR-800 Large Volume Big High Speed Mixer

  Various model of high speed plastic mixer for sale

  Products Release May 02, 2018
• EVA Hot Melt Adhesive Tips Fully Revealed!

  Hot melt adhesive is a solid adhesive that uses thermoplastic resin as the base material, adds various tackifiers, antioxidants, and other auxiliary materials, and is melted and mixed. It has the advantages of solvent free, convenient synthesis, short curing time, wide bonding range, convenient storage and transportation, and green environmental protection, thus achieving rapid development.

  Material Introduction December 14, 2023
• The Importance of Maintaining Compounding Extruder

  Care and keeping your compounding extruder in good condition is critical to the performance and longevity of the equipment. A compounding extruder is a key piece of equipment used to mix and process materials such as plastics, and it plays an important role in the production process.

  Products Release December 11, 2023
• What Is The Difference between "Pre Mixing" And "Mixing" in Plastic Modification?

  ▪ Pre mixing - refers to the mixing of modified materials (base materials, auxiliary materials, additives) in the pre mixing machine before the polymer mixing host (such as twin screw, continuous mixer, Booth kneading machine, three screw, etc.), and basically operating below the melting point of the base resin; ▪ Mixing - refers to the use of measuring scales (including weight loss scales, weight gain scales, solid volume pumps, etc.) above the main material inlet of the mixing host to achieve "mixing" of multi flavored materials in a small discharge well (or hopper), and to achieve "mixing" in the host; The latter obviously completes wetting, dispersion, extrusion, and granulation above the melting point of the base material.

  Material Introduction December 07, 2023
• 10 Precautions And Four Example Analysis for Modified Nylon

  The special properties of nylon make it widely used in automobiles, electronic and electrical equipment, mechanical structures, sports equipment, textiles, and other fields. But with the miniaturization of automobiles, the high-performance of electronic and electrical equipment, and the acceleration of lightweight mechanical equipment, the demand and performance requirements for nylon are gradually increasing. Therefore, the modification of nylon is particularly important.

  Material Introduction December 05, 2023
• Lab use PE+Caco3 filler masterbatch making twin screw extruder

  Lab use PE+Caco3 filler masterbatch making granualtor

  Products Release May 28, 2018
• Performance and Application of Biodegradable Plastic PLA and PBS

  Any interest in biodegradable plastic granule compounding extruder, please feel free to contact Nanjing Haisi Extrusion.

  Material Introduction January 04, 2022
• TPE Material Decoding: Revealing The Four Commonly Used Thermoplastic Elastomer Materials

  Thermoplastic elastomers are an important component of elastomers. Common types of thermoplastic elastomers include styrene based thermoplastic elastomers, polyurethane based thermoplastic elastomers, polyolefin based thermoplastic elastomers, and polyamide based thermoplastic elastomers.

  Material Introduction November 30, 2023