Products Release

• Introduction To PVC Mixing Technology

  In the PVC (polyvinyl chloride) processing technology, mixing technology plays a vital role as the first process in the production of PVC products. However, many companies often do not pay enough attention to the mixing process, which leads to misunderstandings among workers about mixing technology, thinking that it is enough to just mix the materials evenly. This article will introduce the role, principle and process of PVC mixing in detail to help readers fully understand PVC mixing technology.

  Products Release December 16, 2024
• Causes And Solutions for Material Leakage From Vacuum Port of Extruder

  Whether the venting screw leaks material is directly related to the extrusion process, plastic properties, and the design of the screw and vent. Therefore, when manufacturers use venting extruders for production and processing, they must have a detailed understanding of the processing technology, resin characteristics, and equipment performance to ensure that the venting extruder can operate normally and stably.

  Products Release December 09, 2024
• Tips for Perfect Combination of Twin-Screw Extruder And Thermoplastic Elastomer

  Advances in twin screw extruders offer opportunities for processing that is shear sensitive or limited by torque and/or temperature. Regardless of the formulation and/or end product, it is important for processors to understand and employ the latest technology to achieve success.

  Products Release December 05, 2024
• Basic Concepts And Working Principles of Extruder Screen Changers

  Extruder screen changer, as the name implies, is a device used in plastic extrusion production lines. Its main function is to filter out impurities and particles in the melt to ensure the purity and consistency of the extruded material. The screen changer contains one or more filters, which can be replaced according to production needs to achieve a continuous filtering effect. In the plastic extrusion process, the presence of the screen changer effectively avoids production line interruptions and product quality problems caused by impurities.

  Products Release November 14, 2024
• Do You Know The 11 Important Principles of Plastic Extrusion?

  11 important principles of plastic extrusion 01Mechanical Principle 02Heat principle 03Deceleration principle 04Feed acts as coolant 05In the feeding area, it sticks to the barrel and slides onto the screw 06Materials cost the most 07Energy costs are relatively unimportant 08The pressure at the end of the screw is important 09Output = displacement of the last thread +/- pressure flow and leakage 10 Shear rate plays a major role in viscosity 11The motor and the cylinder are opposite to each other

  Products Release November 18, 2024
• The Main Causes And Countermeasures of Gear Transmission Noise

  Traditionally, the two main factors for measuring gear transmission performance are load capacity and fatigue life, and transmission noise and transmission accuracy are often ignored. With the promulgation of ISO14000 and ISO18000, the importance of controlling gear transmission noise has become increasingly apparent, and industrial development and demand have increasingly stringent requirements for transmission errors of high-precision equipment (gear transmission backlash). The currently known factors that cause gear noise can be roughly analyzed from several aspects, including design, manufacturing, installation, use and maintenance.

  Products Release November 04, 2024
• There Are Higher Requirements for The Production Efficiency And Product Quality of Twin-screw Extruders. Where Can We Start To Optimize Them?

  As the manufacturing and processing technology of twin-screw extruders becomes better and better, it not only has to perform tasks such as feeding and plasticizing, but also has some requirements such as dehydration and drying. In order to better meet the different needs of users, the twin-screw extruder must continuously improve its working efficiency, and also find ways to improve the quality of the products produced.

  Products Release October 28, 2024
• Why Is The Extrusion Temperature Higher Than The Melting Point?

  In summary, although the resin begins to melt at its melting point, in order to ensure a smooth extrusion process and produce high-quality films, it usually needs to be processed at a temperature higher than the melting point.

  Products Release October 21, 2024
• What Is The Difference between Roots Blower And Screw Blower?

  Roots blowers and screw blowers have their own characteristics, and the choice should be based on the needs and scenario conditions of the specific application. Roots blowers are suitable for occasions with large flow and low pressure requirements, while screw blowers are more suitable for applications that require high pressure and stable airflow.

  Products Release October 17, 2024
• Have You Solved These Problems Encountered in The Production Process of TPE Extrusion Materials?

  Have you solved these problems encountered in the production process of TPE extrusion materials? 1. Rough surface of molded product 2. Scaling 3. Unstable extrusion volume 4. Deformation 5. Stripes

  Products Release September 23, 2024