Products Release

• Classification of Recycled PE And Its Diversified Uses After Modification

  Classification of recycled PE and its diversified uses after modification Main classification of recycled PE Modified types of recycled PE Uses of recycled modified PE

  Products Release July 04, 2024
• Four Ways To Clean Twin Screw Extruder Screws

  As the workhorse in the field of compounding, the twin-screw extruder's superior performance and customizability are its advantageous features in this position. It can combine different additives and fillers to achieve different particle shapes and properties with different properties. While a variety of additives and fillers can be processed for extrusion, some methods of obtaining these products can also lead to contamination problems and low flow or low pressure in many areas throughout the barrel.

  Products Release July 01, 2024
• Is The Die Hole Blocked Again? Whether It Is Stopping The Machine Or Changing Materials, These Six Solutions Are Worth A Look！

  The template of the extruder consists of a template body with a discharge hole and a heat insulation layer, and is fixed to the die head with a threaded rod. Only when the discharge speed of each die hole is consistent can particles of uniform size be cut out. During use, there are many factors that affect the smooth flow of the template. When the template is severely blocked, it will affect the appearance of the particles, the service life of the cutter, and cause shutdown.

  Products Release June 24, 2024
• Elastomer Granulator Production Process And Flow

  Elastomer granulator production process and flow Using styrene block copolymers (SBS, SEBS, SEPS, SIS, etc.) as the basic material, supplemented with other polymers, fillers and processing aids Thermoplastic elastomer blends

  Products Release June 17, 2024
• Factors Affecting The Mixing Process of Kneader Machine

  Process parameters that affect mixing in the kneader: 1: Filling coefficient and feeding materials 2: Mixing procedure and feeding sequence 3: Mixing temperature 4: Mixing time 5: Rotor speed

  Products Release June 13, 2024
• The Difference between Conical Twin Screw Extruder And Parallel Twin Screw Extruder

  According to whether the axis lines of the twin screws are parallel or not, they can be divided into two types of extruders: those with parallel axis lines and those with intersecting axis lines. The one with parallel axis lines is a parallel twin screw extruder, and the one with intersecting axis lines is a conical twin screw extruder.

  Products Release June 11, 2024
• Introduction To The Segmentation of The Extruder Screw

  When the material moves forward along the screw, it experiences changes in temperature, pressure, viscosity, etc. This change is not the same throughout the entire length of the screw. According to the changing characteristics of the material, the screw can be divided into a feeding section, a compression section and a homoge0nization section.

  Products Release June 06, 2024
• Comparative Advantages of Plastic Twin-screw Extruders And Single-screw Extruders

  The specific structure of plastic twin-screw extruders is based on the actual twin-screw extruders, and specially designed twin-screw extruders can be divided into meshing types and non-meshing types according to the relative positions of the two screws. Plastic twin-screw extruders can arrange and combine thread elements and barrel elements of various geometric shapes. Based on experience-theory-practice-test, the design can be optimized for different mixing requirements to adapt to the needs of different process formulas, making the co-rotating twin-screw extruder highly adaptable.

  Products Release May 20, 2024
• How To Maintain The Plastic Pelletizer?

  As an environmentally friendly mechanical production equipment, plastic pelletizers produce useful granular plastics, but for these plastic production machinery and equipment, necessary maintenance is still required, especially in daily life. Some maintenance before and after production can maintain the normal operation of the equipment and extend its service life, which is also very good for users.

  Products Release May 16, 2024
• Application Classification And Characteristics of Plastic Recycling Pelletizer

  Application Classification and Characteristics of Plastic Recycling Pelletizer Crushed material recycling and granulation production line: Film material two-stage single-screw granulation production line: Nylon waste filament and fishing net single screw recycling and pelletizing production line:

  Products Release May 13, 2024