Article List

• PVC/CPE Blending Modification

  CPE can act as a compatibilizer between PVC and PE and can improve the properties of the blends. It is of great significance for the recycle and reuse of PVC and PE recycled plastics.

  Material Introduction November 16, 2018
• PVC Blending Modification

  The main methods of modification are chemical modification, filling modification, strengthening modification, blending modification and nanocomposite modification.

  Material Introduction November 14, 2018
• Machine Test Running - Rubber Kneading Machine

  Kneading machine is a widely used auxiliary machine in plastic extruder line.It is for plastic and rubber pre-mixing.Here is a machine running video. Any interest please feel free to contact us!

  Machine Test Running November 12, 2018
• Rubber & Plastic Kneading Machine

  Application: used for rubber and plastic mixing, also suitable for mixing and kneading of viscous materials.

  Products Release November 07, 2018
• PE + 85% Caco3 High Filling Masterbatch Air Cooling Granulating Line

  Pre mix the raw material with high speed mixer machine.

  Machine Test Running November 05, 2018
• The difference between modified plastics and unmodified plastics

  In fact, any plastic raw material has at least a certain proportion of stabilizers when it leaves the factory to prevent it from degrading in storage, transportation and processing. Therefore, strictly speaking, "unmodified plastics" do not exist. In industry, basic resins produced by chemical plants are commonly called "unmodified plastics" or "pure resins".

  Material Introduction October 31, 2018
• TSE-95D Twin Screw Extruder in Water Strand Pelletizing Line

  Here is the TSE-95D (TSH-95B) twin screw extruder.The gearbox is D type, which is better than the B type.Some photos of the machine test running in water strand pelletizing line.

  Products Release October 24, 2018
• Intergral Bath + Blower + Pelletizer for Water Strand Extrusion Line

  The integral water bath + blower + pelletizer is special designed for lab scale extruder machine.It's easier for customer to install the extrusion line.

  Products Release October 22, 2018
• PP Functional Modification

  PP Functional Modification

  Material Introduction October 15, 2018
• PP Blending modification

  Blending modification refers to the blending of other plastics, rubber, or thermoplastic elastomers with PP and filling them into larger crystal spheres in PP to improve the toughness and low temperature brittleness of PP.

  Material Introduction October 12, 2018