The future development trend of PC/ABS alloy will focus on technological innovation, market demand growth, expansion of application areas and performance improvement, and the prospects are broad.

Hot melt adhesive is a plastic adhesive. Its physical state will change with the change of temperature within a certain temperature range. Its chemical properties are non-toxic and odorless, and it is an environmentally friendly chemical.

The so-called "plastic modification" refers to a method of adding one or more other substances to the plastic resin to change its original properties, improve one or more aspects of its properties, and thus expand its scope of application.

As the manufacturing and processing technology of twin-screw extruders becomes better and better, it not only has to perform tasks such as feeding and plasticizing, but also has some requirements such as dehydration and drying. In order to better meet the different needs of users, the twin-screw extruder must continuously improve its working efficiency, and also find ways to improve the quality of the products produced.

Polyethylene terephthalate is a colorless, transparent substance with a certain gloss (amorphous), or an opaque milky white substance (crystalline). Physical properties: Polyethylene is non-toxic, odorless, and milky white. It has a density of 0.91-0.96g/cm3 and is a crystalline plastic. Polyethylene has a certain mechanical strength, but its mechanical strength is lower than that of other plastics and its surface hardness is poor.

In summary, although the resin begins to melt at its melting point, in order to ensure a smooth extrusion process and produce high-quality films, it usually needs to be processed at a temperature higher than the melting point.

Roots blowers and screw blowers have their own characteristics, and the choice should be based on the needs and scenario conditions of the specific application. Roots blowers are suitable for occasions with large flow and low pressure requirements, while screw blowers are more suitable for applications that require high pressure and stable airflow.

In the quality indicators of raw materials, we often encounter some terms. Accurately understanding their meanings will help us better grasp the performance of raw materials. Here are some commonly used terms.

To improve the film's sliding properties, a sliding additive is introduced during its production (usually the active substances are oleamide and erucamide). After film extrusion, the additive migrates to the surface and creates a sliding layer on it, due to which the friction coefficient is significantly reduced and the film's sliding properties are improved.

The plastic granulator is a kind of equipment commonly used to produce plastic granules. The temperature regulation of each area is very important for product quality and production efficiency. The following will introduce in detail the temperature regulation method of each area of the plastic granulator.