Whether the venting screw leaks material is directly related to the extrusion process, plastic properties, and the design of the screw and vent. Therefore, when manufacturers use venting extruders for production and processing, they must have a detailed understanding of the processing technology, resin characteristics, and equipment performance to ensure that the venting extruder can operate normally and stably.

Advances in twin screw extruders offer opportunities for processing that is shear sensitive or limited by torque and/or temperature. Regardless of the formulation and/or end product, it is important for processors to understand and employ the latest technology to achieve success.

Filler masterbatch refers to the granules and powders obtained by mixing and kneading various additives and fillers with a small amount of carrier resin in the process of plastic processing and molding for the convenience of operation. The main component of filler masterbatch is filler, which is mainly used for the processing and molding of polyolefins (polyethylene and polypropylene), and is also called polyolefin filler masterbatch.

01 Types of Elastomers 02 Mechanism of elastomer-enhanced toughened polymers

The future development trend of PC/ABS alloy will focus on technological innovation, market demand growth, expansion of application areas and performance improvement, and the prospects are broad.

Hot melt adhesive is a plastic adhesive. Its physical state will change with the change of temperature within a certain temperature range. Its chemical properties are non-toxic and odorless, and it is an environmentally friendly chemical.

11 important principles of plastic extrusion 01Mechanical Principle 02Heat principle 03Deceleration principle 04Feed acts as coolant 05In the feeding area, it sticks to the barrel and slides onto the screw 06Materials cost the most 07Energy costs are relatively unimportant 08The pressure at the end of the screw is important 09Output = displacement of the last thread +/- pressure flow and leakage 10 Shear rate plays a major role in viscosity 11The motor and the cylinder are opposite to each other

PBAT (polybutylene adipate/terephthalate) is a biodegradable plastic that is widely used in many fields due to its good biodegradability and physical properties.

The so-called "plastic modification" refers to a method of adding one or more other substances to the plastic resin to change its original properties, improve one or more aspects of its properties, and thus expand its scope of application.

As the manufacturing and processing technology of twin-screw extruders becomes better and better, it not only has to perform tasks such as feeding and plasticizing, but also has some requirements such as dehydration and drying. In order to better meet the different needs of users, the twin-screw extruder must continuously improve its working efficiency, and also find ways to improve the quality of the products produced.