Thermoplastic elastomers, abbreviated as TPE or TPR, are also referred to by many as SBS, a specific type of elastomer. But in reality, there is no unified name for thermoplastic elastomers both domestically and internationally, and most of the time they are represented by the English abbreviation TPE.

PVC needs to add additives in processing in order to produce various products that meet people's needs, such as soft, hard, transparent, good electrical insulation, foaming, etc. When selecting the variety and dosage of additives, it is necessary to comprehensively consider various factors, such as physical and chemical properties, flowability, and formability, in order to ultimately establish an ideal formula.

Coupling is an important connecting device between the main motor of the extruder and the gearbox. Currently, nylon rod couplings and safety couplings are commonly used on the market. Nylon rod couplings have a simple mechanical structure and low cost, but the torque is not accurate. They rely entirely on the shear force of the torque greater than that of the nylon rod. When the nylon rod is cut off, it needs to be reattached.

1 Overview of modified plastics for vehicles; 2 Automotive use and modification of PP; 3 Automotive use and modification of PA; 4 Automotive use and modification of ABS; 5 Vehicle use and modification of other plastics; 6 Conclusion

The main components of automobile lights are composed of reflectors, lenses, casings, light sources, electronic circuits, and installation accessories. With the development trend of lightweight automobiles, the proportion of plastics in automobiles is getting higher and higher.

With the development of industries such as automobiles, machinery, electronics, and aerospace, the requirements for material properties are becoming increasingly high. Developing high-performance and multifunctional modified nylon (PA) special materials has become a major research and development topic.

Five common problems and solutions in plastic granulation 01 Black Dots 02 Broken Bar 03 Hollow 04 Material Overflow 05 Bridge Construction

Plastic extruder is a common plastic mechanical equipment. In the daily operation of the extruder, various faults are inevitable, which affect the normal production of the extruder. Below, we will analyze the faults of the extruder in detail.

Bridging occurs when materials interlock or bond together, forming an arch above the container outlet. There are many factors that cause the "bridging" phenomenon: particle size, shape, specific gravity, humidity, static electricity, the cohesive strength and internal friction of a single particle will all have an impact on the "bridging" phenomenon. When this happens, the arched structure holds the rest of the contents in the feeder in place, preventing the remaining material from being discharged.

Plastic granulator machines have revolutionized the way we handle plastic materials. They enable us to transform plastic waste and raw materials into manageable granules, reducing waste and contributing to sustainability. This guide aims to provide a comprehensive understanding of plastic granulators, their advantages, and their crucial role in promoting efficiency and sustainability.